Click Image for Gallery
BRITA Talori Filter Tap - WD3030
How to change the P1000 Filter Cartridge
|Model||BRITA Talori WD3030 3 Way Tap Triflow Water Filter Tap|
|In Depth||Simple installation — trouble-free assembly: |
The Starter Set contains all the elements required for assembly and a practical wall mounting bracket for the system's filter head. As the BRITA under-counter filter works as a pressurised filtration system, it can be installed in any position, either horizontally or vertically. The cartridge fits perfectly into the space available under the sink. An additional 3/8 inch connection is required to install the 3-way dispenser, which can be created with the T-connector included in the Starter Set.
The Starter Set also includes the electronic BRITA cartridge change indicator, which makes an acoustic sound at intervals as a reminder at the end of the maximum cartridge usage time. After activating when inserting the new cartridge, it can be fitted with a hook-and-loop tape fastener under the sink.
Effortless cartridge replacement:
The filter cartridge can be easily replaced at the end of its maximum service life. The water filter can be depressurised through the integrated flush valve before the used cartridge is removed from the filter head. Then insert the new cartridge and activate the water filter in the same way as with the initial installation, and enjoy many more weeks of BRITA filtered water. Used filter cartridges can be recycled.
Stylish 3-way dispenser
Separate marked lever for BRITA filtered water and lever for hot/cold water selection from normal mains water.
Innovative, integrated outlet for filtered water as well as hot and cold water.
Outside: chrome-plated brass, inside: stainless steel
Certified quality: ACS, SVGW
Height: approx. 36.4 cm, depth: approx. 20.6 cm
P 1000 filter cartridge
Cartridge performance in hard water areas (up to 8.5 dH):
1000 litres = approx. 6 months
Cartridge performance in very hard water areas (above 8.5 dH):
500 litres = approx. 3 months
BRITA filter head
Individual setting possible depending on water hardness
Water hardness test strips to determine hardness are available free of charge from Brita here
Integrated flow controller ensures optimised water jet with high water pressure.
BRITA cartridge change indicator
Sounds a beep after 90 or 180 days, depending on the water hardness setting made on the filter head, to remind you to change the cartridge.
Please note: If installing with a low pressure boiler a pressure-reducing valve may need to be fitted to the cold supply.
Boxed Weight & Dimensions:
Weight: 5.3 kg
Length: 46 cm
Width: 34 cm
Height: 20 cm