Luminor Blackcomb 5.0 UV Systems | Ultra Violet Water Disinfection
PHONE TO ORDER Luminor Blackcomb 5.0 UV System

 

Luminor Blackcomb 5.0 UV System

The Luminor Blackcomb is a premium UV water disinfection system and is truly different from everything else in the market. Blackcomb's state-of-the-art 5.0 series controller is a constant current electronic power source, housed in a splash-proof case and comes standard with a "future-proof" expandability port for future upgrades or options.


A colour user interface allows for easy visual identification of remaining lamp life and any error or fault codes. The system even incorporates QR codes to access lamp change information and videos via web access. Finished in 304 stainless steel, the single-end reactors come with an integral port to allow for a future upgrade to a UV monitored system.


If a monitor is not required, an integral visual glow plug is provided as an extra way to ensure that your UV lamp is illuminated. The single-end design allows for lamp change without the need to drain the reactor chamber. Reliable, industry proven, high quality low pressure (LP) coated UV lamps are used offering a consistent output over their 9,000 hour life. 

 

Product Features: 

  • 12 or 24 VDC controller comes with 1.8 m (6') of bare leads to allow for easy connection to a DC power source (optional AC adaptors are available separately if required)
  • Colour user interface with full diagnostics and warnings including QR codes.
  • ”Future-proof” expandability port for future upgrades and options.
  • Single ended, 304 stainless steel, polished reactors. POE systems include an integral sensor port to allow for sensor upgradeability in the future.
  • Designed & manufactured to ASME pressure vessel standards.
  • Flow rates stated at 95% UVT at a dose of 30mJ/cm
  • User friendly bayonet style lamp connector (quick 1/4 turn removal with no extra tools needed)
  • True gland seal retaining nut with positive stop
  • Reliable, industry proven low pressure (LP) coated UV lamps with ceramic bases for durability and a 9000 hour life (1 year)
  • Constant current electronic controller in a splash-proof (IP-54) case

 

Optional Accessories


Solenoid control module: Used to power a remote normally closed solenoid valve (not included). Solenoid will close on lamp failure or when low UV conditions are detected by the sensor. 


4-20 mA output Module: Used for signal transfer to a remote device such as a data logger or computer.


UV Intensity sensor/monitor: Allows for the 254nm UV wavelength to be measured and displayed via the BLACKCOMB controller. The sensor plugs directly into the controller and is mounted in the sensor port located on all 5.0 BLACKCOM.

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

 

Model Luminor Blackcomb 5.0 UV System
SKU LB5-033
Brand Luminor
In Depth

Systems Specifications:

Luminor Blackcomb 5.0 12 LPM UV System:

Flow Rate (@ 16 mJ/cm²): 6.1 gpm, 23 lpm, 1.4 m³/hr 
Flow Rate (@ 30 mJ/cm²): 3.1 gpm, 11 lpm, 0.7 m³/hr 
Flow Rate (@ 40 mJ/cm²): 2.4 gpm, 9.1 lpm, 0.5 m³/hr 
Port Size: ½" MNPT
Electrical: 90-265V / 50-60Hz 
Lamp Watts: 15 
Controller Dimensions: 6.8 x 3.6 x 3" (171.5 x 92.1 x 76.2 mm) 
Maximum Operating Pressure: 8.6 bar (125 psi) 
Operating Temperature Range: 2-40° C (36-104° F) 
UV Monitor: No 
Solenoid Output: Optional 
4-20 mA Output: Optional 
Lamp Change Reminder (audible & visual): Yes 
Lamp-Out Indicator (audible & visual): Yes 
Shipping Weight: 3.6 kg (8.0 lbs)

 



Luminor Blackcomb 5.0 22 LPM UV System:

Flow Rate (@ 16 mJ/cm²): 11 gpm, 41 lpm, 2.5 m³/hr 
Flow Rate (@ 30 mJ/cm²): 5.8 gpm, 23 lpm, 1.3 m³/hr 
Flow Rate (@ 40 mJ/cm²): 4.4 gpm, 17 lpm, 1.0 m³/hr 
Port Size: ¾" MNPT
Electrical: 90-265V / 50-60Hz 
Lamp Watts: 22 
Power (watts): 30 
Chamber Material: 304 Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated 
Replacement Lamp: RL-470 
Replacement Sleeve: RQ-470 
Reactor Dimensions: 2.5 x 20.5" (6.4 x 52.2 cm)
Controller Dimensions: 6.8 x 3.6 x 3" (171.5 x 92.1 x 76.2 mm)
Maximum Operating Pressure: 8.6 bar (125 psi) 
Operating Temperature Range: 2-40° C (36-104° F) 
UV Monitor: Optional
Solenoid Output: Optional 
4-20 mA Output: Optional 
Lamp Change Reminder (audible & visual): Yes 
Lamp-Out Indicator (audible & visual): Yes 
Shipping Weight: 4.2 kg (9.2 lbs)

 



Luminor Blackcomb 5.0, 41 LPM UV System

Flow Rate (@ 16 mJ/cm²): 20 gpm, 77 lpm, 4.6 m³/hr 
Flow Rate (@ 30 mJ/cm²): 11 gpm, 41 lpm , 2.5 m³/hr 
Flow Rate (@ 40 mJ/cm²): 8.3 gpm, 31 lpm, 1.9 m³/hr 
Port Size: ¾" MNPT
Electrical: 90-265V / 50-60Hz 
Lamp Watts: 39 
Power (watts): 49 
Chamber Material: 304 Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated 
Replacement Lamp: RL-820 
Replacement Sleeve: RQ-820 
Reactor Dimensions: 2.5 x 34.3" (6.4 x 87.2 cm)
Controller Dimensions: 6.8 x 3.6 x 3" (171.5 x 92.1 x 76.2 mm)
Maximum Operating Pressure: 8.6 bar (125 psi) 
Operating Temperature Range: 2-40° C (36-104° F) 
UV Monitor: Optional
Solenoid Output: Optional 
4-20 mA Output: Optional 
Lamp Change Reminder (audible & visual): Yes 
Lamp-Out Indicator (audible & visual): Yes 
Shipping Weight: 6.8 kg (15.0 lbs) 



Luminor Blackcomb 5.0 57 LPM UV System

Flow Rate (@ 16 mJ/cm²): 30 gpm, 110 lpm, 6.8 m³/hr
Flow Rate (@ 30 mJ/cm²): 15 gpm, 57 lpm, 3.4 m³/hr 
Flow Rate (@ 40 mJ/cm²): 12 gpm, 45 lpm, 2.7 m³/hr 
Port Size: 1" MNPT 
Electrical: 90-265V / 50-60Hz
Lamp Watts: 50 
Power (watts): 62 
Chamber Material: 304 Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated 
Replacement Lamp: RL-999 
Replacement Sleeve: RQ-999
Reactor Dimensions: 2.5 x 40.0"(6.4 x 101.6 cm)
Maximum Operating Pressure: 8.6 bar (125 psi) 
Operating Temperature Range: 2-40° C (36-104° F) 
UV Monitor: Optional
Solenoid Output: Optional 
4-20 mA Output: Optional 
Lamp Change Reminder (audible & visual): Yes 
Lamp-Out Indicator (audible & visual): Yes 
Shipping Weight: 8.0 kg (17.6 lbs) 




Luminor Blackcomb 5.0, 79 lpm/ 21 gpm (US)   UV 

Flow Rate (@ 16 mJ/cm²): 39 gpm, 39 gpm, 8.9 m³/hr 
Flow Rate (@ 30 mJ/cm²): 21 gpm, 79 lpm, 4.8 m³/hr 
Flow Rate (@ 40 mJ/cm²): 16 gpm, 59 lpm, 3.6 m³/hr
Port Size: 1" MNPT 
Electrical: 90-265V / 50-60Hz 
Lamp Watts: 42 
Power (watts): 51 
Chamber Material: 304 Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated 
Replacement Lamp: RL-850 
Replacement Sleeve: RQ-850 
Reactor Dimensions: 3.5 x 36.1"(8.9 x 91.7 cm) 
Controller Dimensions: 6.8 x 3.6 x 3" (171.5 x 92.1 x 76.2 mm)
Maximum Operating Pressure: 8.6 bar (125 psi) 
Operating Temperature Range: 2-40° C (36-104° F) 
UV Monitor: Optional
Solenoid Output: Optional 
4-20 mA Output: Optional 
Lamp Change Reminder (audible & visual): Yes 
Lamp-Out Indicator (audible & visual): Yes 
Shipping Weight: 7.4 kg (16.4 lbs) 

Luminor Blackcomb 5.0 UV System

The Luminor Blackcomb is a premium UV system and is a true state-of-the-art water steriliser, distinctly different from anything elseavailable on the market today. Blackcomb's cutting edge 5.0 series controller is a constant current electronic power source, housed in a splash-proof case and comes standard with a "future-proof" expandability port for future upgrades or options. Single ended, 304 stainless steel, polished reactor POE systems include an integral sensor port to allow for sensor upgradeability in the future.

  • Views: 701
  • Product Code: Luminor Blackcomb 5.0 UV System
  • Availability: PHONE TO ORDER
  • Call for Price

Available Options



Tags: Luminor Blackcomb, UV system, uv water disinfection, constant current, 304 stainless steel