PurePro RS4000 Under-sink Inline Alkaline Purifier
The PurePro RS4000 Under-sink Inline Alkaline Purifier is a truly one of a kind and unique system as no other inline under-sink water filter system incorporates a four stage ultra-filtration purification method with the addition of an alkalizing and ionization filter to condition the water to be even healthier.
The PurePro RS4000 Under-sink Inline Alkaline Purifier uses ultra-filtration technology to effectively remove microorganisms like Giardia and Cryptosporidium from your water protecting you and your family from parasitic illnesses caused by these contaminants.
4 Stage Filtration
Stage 1: 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.
Stage 2: Granular Activated Carbon Filter:
It reduces or effectively removes chlorine, asbestos and organic chemicals. It provides enhanced reduction of taste, and odour.
Stage 3: Ultra-filtration Granular Activated Filter :
It takes out microorganisms and further reduces the chlorine and organic chemicals, providing an enhanced reduction of bad taste, odour, and colour.
Stage 4: Alkaline Filter :
The Alkaline filter changes your water into a perfect natural alkaline ionized water. The Alkaline filter gently releases minerals lost in the filtration process, such as ionized calcium, magnesium, sodium, potassium ions.
Quick Change Filters for easy, simple and quick filter changes - no plumbers needed!
The patented quick-change filter technology means changing the filters is a breeze as they simply twist on and off with no tools or plumbing skills needed.
Simply turn off the feed water using the handle. Run the tap until the water stop running (which will happen after a few seconds).
The cartridges simply screw into the bracket using a simply 1/4 turn, so you can literally change all the filters in less than 20 seconds.
The bracket is cleverly colour coded so you know exactly which filter goes where. The filters use double o-rings designed to prevent any possibility of leaks.
Once you are done, simply turn the handle back to allow the water to flow through and then run the tap for around 3-5 minutes to clear any carbon fines. After this your filters have been changed successfully and your system is ready to use.
The filters should all be changed every 6 months or every 4 months for heavier usage. The manufacturers recommended capacity given compliant mains tap water is around 5700 litres.
Consider buying with a 3-way tap
Consider upgrading to a 3-way tap! This is a single kitchen mixer tap with hot, cold and filtered water connections in one elegant solution - a must have for marble or granite worktops or anyone looking to the most elegant and stylish option. At Puriflow Filters, we have a great selection of 3-way taps anywhere so you are spoilt for choice.
Browse the Puriflow Range of 3-Way Taps suitable for high pressure hot and cold water systems (i.e. for combi/mega-flow boilers or pumped hot water tanks and mains cold water pressure).
If you have a low pressure hot water system such as a gravity fed hot water tank without a pump, then browse our range of Franke Filterflow taps which provide superb flow rates at the lowest of pressures.