Osmio Kensington Chrome Dual Cross 3-Way (Tri-flow) Kitchen Tap
All the Osmio 3 Way Taps come with an extended 3 year warranty and we also stock replacement parts and valves to ensure your tap will be in good working order. We often get asked by customers whether they can see it in person before buying, which we cannot do as we are an internet based retailer. For this reason we can offer the best prices but also a no quibble guarantee, so if you want to return the product to us for whatever reason you will receive a full refund.
|Model||Osmio Kensington Chrome 3-Way (Tri-flow) Kitchen Tap|
|In Depth||Supplied with fixing accessories and 3 flexible hoses 1/2" male. |
Finished in polished chrome, this stylish and functional kitchen tap will be compatible with any of our drinking water filter systems. Slight vertical movement between the spout and base to prevent early seizing up and stiffness of the spout over time
We have a great selection of Three Way taps, also known as TriFlo or Triflow taps. These are effectively a single kitchen tap for your hot and cold water and in addition your filtered and purified water. All of our drinking water filters come with a standard faucet tap which is fitted in addition to the kitchen sink tap. These 3 way taps remove the need for this, providing one single and stylish solution.
The Osmio Kensington is supplied with tubing that is 1/2" BSP male. You can connect it up to any existing water filter but you will need a tap adaptor
- For 1/4" (6mm tubing) you need a 1/2” x ¼” push fit tap adaptor
- For 3/8" (10mm tubing) you need a 1/2" female to 3/8" push fit tap adaptor.
- Both of which are standard plumbing parts - if you need them just ask us! These come supplied if you buy the tap with any of our water filter systems.
Water Pressure & Flow Chart
This tap will produce the following flow rates according to the incoming pressure on both hot and cold:
0.5 bar - 0.6L/M/0.5 bar - 0.6L/M
1.0 bar - 2.4L/M/1.0 bar - 2.4L/M
1.5 bar - 6.0L/M/1.5 bar - 5.4L/M
2.0 bar - 7.2L/M/2.0 bar - 6.0L/M
2.5 bar - 8.0L/M/2.5 bar - 7.6L/M
It is therefore recommended that this tap only be used on a pressurized hot water system. It may be used on a gravity fed hot water system provided the incoming pressure produces a flow rate that is acceptable to you, or if the gravity fed hot water system is pumped and pressurized.
Tap base hole size: 35 mm
Warranty: 5 year long warranty on the valves and 1 year on the finish