Click Image for Gallery
Watts Pro 10 inch Softening and Chlorine Removal Water Filter System
|Model||Watts Pro 10 inch Scale Treatment and Chlorine Filter System|
|SKU||Watts Pro 10 inch Scale Treatment and Chlorine Filter System|
|In Depth||Housing Specification: |
Straight thread design on sump EPDM O-ring
Max Pressure: 90 psi (6.3 bar)
Max Temperature: 125°F
Service Flow Rate: up to 35 GPM @ 60 psi
Housing Options: Pressure Relief
Height: 14 "
Width: 7-1/4 "
Cap : Polypropylene
Sump: Styrene Acrylonitrile
Button Assembly 300 series stainless steel, EPDM, Polyproylene
About Each Filter:
Watts 10"X4.5" Big Blue Coconut Carbon Block 5 Micron Filter
Reduces Chlorine/Taste/Odor (CTO) and certain Volatile Organic Chemicals (VOC) from drinking water using coconut base carbons for a sweeter taste.
Great dirt holding capacity
No carbon fines
Maximizes carbon capacity & maintains a low pressure drop
Bad Taste & Odour
Micron Rating: 5 Nominal
Dimensions: 10" x 4.5"
Operation Temperature: 40°F to 145°F
Filter Media: Coconut Base Carbon
Filter Life: 10,000 Gallons; Recommended filter change every 6 months.
The Watts Scalenet media is maintenance free, chemical free and salt free and does not require regeneration or backwashing. The Scale Net media has all the scale prevention advantages of an ion exchanger, for example the amount of soap and detergents needed is smaller. There are no more spots on dishes, bathroom tiles, etc. The Scale Net reliably transforms the
calcium ions into calcium bonds. These bonds are stable and cannot attach to surfaces, hardware, etc. The crystals are rinsed away by the water flow. The size of the bonds is so small that they can only be seen with a microscope. Therefore the effect is the same as if the water was completely free of calcium.
Tests lasting several years showed that the bonds cannot attach to any kind of surface and the result is a 100% scale prevention. Also other ions can no longer attach to surfaces because of the structure of the surface created by Scale Net. Because the ions are formed into stable bonds, the TDS is thus lowered. Please note that a TDS meter does not directly measure the total dissolved solids, but rather the conductivity. It cannot distinguish between bonds and dissolved solids, therefore it is not suitable for this system.
Appearance: Small light yellow/beige balls
Moisture Content - 24 to 28%
Density - 1,18 to 1,22
Weight - 650g/L
Media Particle Size - 550 to 750 μm
Small Media Particles < 0,300 mm: maximum 3,0%
Large Media Particles > 1,180 mm: maximum 5,0%
Change in Volume Maximum 60%
Capacity 1 Liter Scale Net media for 4.0 gal/min water flow.
Daily use Media can be used 12 hours a day, no need for regeneration or back flushing
when the direction water flow goes upwards.
Lifetime is usually 3 years but can be 5 to 7 years depending on the amount of chlorine in the water and whether it is being used for a kitchen, small house or flat or on a medium to large home.
Operating Temperatures 41 F to 140 F
pH Range 6.0 to 9.0